Porcelain Sign Page

I collect Bell System signs with the 1921 Bell Logo.
These signs were manufactured and used between
1921 and 1937.

Here are three examples from my collection.  The two on the
left are the standard 11" by 11" flange signs that were most often
issued by each Bell System telephone company, like Pacific
Telephone or Mountain States Telephone.  The round sign is
14" in diameter and was a general purpose sign normally mounted
outside building to identify a pay telephone location.  All of my
signs are mounted on wood backboards for easy display and relocation.

This is known as a "hubcap" sign because it's round and has a
convex surface.  This is a general purpose sign and though not rare,
it's nonetheless difficult to find, especially in mint condition like this
example.  They were found mounted to walls near to or on the sides
of telephone booths and other locations where this type of sign was
appropriate.  It's 8" in diameter.

There are two playing cards partially visible below the sign.  The Bell Logo
on these cards was used prior to 1921, which suggests when the playing cards
were probably given away by the telephone company.

These are "mini" signs, 4" in diameter.  The one on the right is often referred to as a hubcap sign.  The one on the left is flat and doesn't have a special name.  Both of these signs are extremely rare, especially in such beautiful condition.  The one of the left has attachment holes in the center of the sign field while the hubcap mounts on the sides.  Note that both were issued by the Pacific Telephone and Telegraph Company and have the Bell logo used between 1921 and 1937.  These signs were likely attached to company owned equipment.

This is a very large sign.  It is fairly rare these days but I suspect
that there was one in every major city served by New England Bell.
This particular sign may not have suffered New England weather
as there is no damage or wear on either side of double-faced sign.

This sign was probably never used considering its condition on both sides.
Someone, however, cut off the flange on one end which required that
I make a special slotted frame to hold it.  It can be hung from a ceiling or
other location where the sign can be viewed from either direction.

This sign came from somewhere on the East Coast.  The sign
has three small dents visible from both sides, and it shows
signs of harsh weather conditions.  It is a sign most often found
hanging on the front of an Independent Telephone Company office
that had a formal relationship with the Bell System.

This is an 11 by 11 flange sign with the pre-1921 Bell Logo.  It should be noted
however, that Canada used the early Bell System logos after the U.S. Bell System
introduced newer designs.  I do not know the age of this sign, but I suspect it was
produced and used between 1920 and 1940.

This is a Canadian Bell System double-sided flange sign, approximately 6 by 9"
in size.  They were issued in both blue on white and white on blue.  I do not know if
these signs were used by any of the independent Canadian telephone companies.
 

This is a single sided sign, 5 by 19" in size.  These signs were often used on
phone booths or near phone booths, and often had arrows pointing in the direction
of the public phone.  This particular sign is very collectible and not easy to find.  I
understand that there may be as many as 27 different company signs of this style.

This is a very special sign that probably hung near the phone rather than on it.  The
sign is glass with blue and gold leaf under the glass protected by a tin wrap.  The sign
is constructed exactly like those barber and beautician glass frames that held a barber's
license with his or her name below.

---

HOME